RSS-2015 Electric Cable Trap

Download the Data Sheet

Turning Heads Right from the Start

Highlights

All-electric. Smooth & efficient operation, virtually maintenance free.
Handles loads up to 913,000lbs (414,130kg). Shallow-mount & flush installed.
Protects taxiway's from 265' (80m) to over 400' (121m).
ASTM M40 P2 Certified.

Why RSSI?

RSSI electric Cable Trap vehicle barrier

Ideal for taxiway protection

The cable trap was designed to operate over large openings where vehicular traffic is "not" allowed. The cable trap, like all RSSI products, require virtually "no maintenance" and water... no problem!

FOD Friendly

The cable trap allows for vacuum and sweeper vehicles to keep the area "free of debris" without special allowances for the cable trap.

Totally Expandable

We have taxiway's covered presently from 265' (80 meters) to over 400' (121 meters). Larger areas are no problem!

Environmentally friendly.

Like all RSSI products, our barrier is designed to have less impact on the environment than any other barrier. It's energy efficient, free of harmful fluids and toxic lubricants, and made of highly recyclable material.

Shallow Mount

Excavation requires only 24" (.6 meters) and is easy to install. Each port is fully functional and tested at the factory requiring no assembly of the actual barrier. Each part is made to connect together making it easy to install every time.

Evacuation Depth	24 inches below grade
Power Conduit	1¼ inch PVC
Control Conduit	1 inch PVC
Sump Pump Discharge	1 inch PVC
Gravity Drain	4 inch PVC

The RSSI electric Cable Trap vehicle barrier can withstand heavy loads

Designed For Heavy Loads

The cable trap is designed for loads up to 913,000 pounds (414,130 kg) allowing traffic like a 747 freightliner to pass easily over the flush installation. Sensitive aircraft would not have more than 1/4 inch (3.175 cm) reveal at any point on the cable trap.